Hexagon socket Cup Point Set Screws (Ni-Cr-Mo Steel)

Return to the previous place

Cup Point Set Screw

    Hexagon socket Cup Point Set Screws (Ni-Cr-Mo Steel)


  • Diameters : M1.6, M1.7, M2, M2.5, M2.6, M3, M4, M5 (metric set screws)
  • Lengths : 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm
  • Hardness : HRC50-53

 

Hexagon socket Flat Point Set Screws (Ni-Cr-Mo Steel)

Flat Point Set Screw

    Hexagon socket Flat Point Set Screws (Ni-Cr-Mo Steel)


  • Diameters : M1.6, M1.7, M2, M2.5, M2.6, M3, M4, M5 (metric set screws)
  • Lengths : 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm
  • Hardness : HRC50-53

 

Hexagon socket Cone Point Set Screws (Ni-Cr-Mo Steel)

Cone Point Set Screw

    Hexagon socket Cone Point Set Screws (Ni-Cr-Mo Steel)


  • Diameters : M2, M2.5, M2.6, M3, M4, M5 (metric set screws)
  • Lengths : 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm
  • Hardness : HRC50-53

 

Hexagon socket Cup & Cone Point Set Screws (Ni-Cr-Mo Steel)

Cup & Cone Point Set Screw

    Hexagon socket Cup & Cone Point Set Screws (Ni-Cr-Mo Steel)


  • Diameters : M2, M2.5, M2.6, M3, M4, M5 (metric set screws)
  • Lengths : 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm
  • Hardness : HRC50-53

 

Hexagon socket Knurled Cup Point Set Screws (Ni-Cr-Mo Steel)

Knurled Cup Point Set Screw

    Hexagon socket Knurled Cup Point Set Screws (Ni-Cr-Mo Steel)


  • Diameters : M3, M4, M5 (metric set screws)
  • Lengths : 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm
  • Hardness : HRC50-53

 


Generally, small diameter of the hexagon socket set screws, if it is tightened strongly in the hexagonal bar spanner, hexagonal hole is cracked. But our hexagon socket set screws is using the Ni-Cr-Mo Steel (SNCM240) to the material. And furthermore, the precision of the hexagonal hole is good. In addition, the hardness by the heat treatment is high (HRC50 - 53), there is also toughness.

broken test Therefore, the hexagonal hole is not broken even if you tighten it until you can wrench off a hexagonal bar spanner. At that time, when you move the magnet to the hexagonal hole, because it does not have a hexagonal hole deformed, broken hexagonal bar spanner is attracted to the magnet, it will be drawn from the hexagonal hole.

Our hexagon socket set screw dries surface rust prevention oil with a vacuum hot-air drier after black oxide finish (surface treatment). Therefore, the hand of the assembling worker does not get oil at the time of work. In addition, this setscrews is easy to use in automated assembly, and it is hard to rust.