We specialize in very small micro setscrews (mini set screws) from M1 to M2.5.
  Nominal diameters of our very small micro set screws (mini set screws) are M1, M1.2, M1.4, M1.6, M1.7, M2, M2.3, M2.5, and M3. Lengths are 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm. Pointed tip shapes of our very small micro set screws (mini set screws) are "flat point", "cone point" and "oval point / round point". Materials are steel or stainless steel.   SAIDA Manufacturing Co. Ltd.
197-0831
292 Shimoyotsugi Akiruno-city Tokyo JAPAN
(FAX No.)+81 42-559-0138
 
Back to the former page
Custom-ordered the special shape screws and Small Machine Parts
Lead screw (single thread)   Lead=0.85
(Material) Brass
lead-screw lead-screw

Return to the top of this page

Back to the former page

Adjustment Screw   M2xP0.25xL2.5
(Material) Brass
custom-screw custom-screw

Return to the top of this page

Back to the former page

Adjustment Screw   M3.5xP0.35xL3.0
(Material) Brass
adjust-screw adjust-screw

Return to the top of this page

Back to the former page

Bush   D1.6xd1.0xL0.6
(Material) Brass
bush bush

Return to the top of this page

Back to the former page

Pin   D2.5xL6.5
(Material) Brass
pin-joint pin-joint

Return to the top of this page

Back to the former page

Bush   D2.2xd1.0xL1.3
(Material) Phosphor Bronze
reel-shaft-bush  reel-shaft-bush

Return to the top of this page

Back to the former page

Stud Pin   D1.5xL1.1
(Material) Brass
stud-pin stud-pin

Return to the top of this page

Back to the former page

The custom-ordered small precision parts

 The custom-ordered small precision parts are to produce parts according to customer's drawings. If there is not formal drawing, then the sketch is OK too. Based on the sketching, we will make the formal drawing. And we requires approval from you about the formal drawings.

 We are good at simple shapes such as pictured above. Manufacturable length is from 0.5mm to 10.0mm, but we are good at manufacturing of the overall length of 5.0mm or less.
 Various plating and a simple barrel treatment are possible.
 Our specialty materials are brass, phosphor bronze, nickel silver, free cutting steel, stainless steel, and so forth.

 Manufacturable size of outside diameter is from 0.3mm to 5.0mm for miniature machined parts, but their diameter is below by the material.
Materials Outside Diameters
Brass 5mm or less
Phosphor bronze
Nickel silver
4mm or less
Free cutting steel 3mm or less
Stainless steel 3mm or less

Return to the top of this page

Back to the former page

Star
PJR-JAB