We specialize in very small micro setscrews (mini set screws) from M1 to M2.5.
  Nominal diameters of our very small micro set screws (mini set screws) are M1, M1.2, M1.4, M1.6, M1.7, M2, M2.3, M2.5, and M3. Lengths are 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm. Pointed tip shapes of our very small micro set screws (mini set screws) are "flat point", "cone point" and "oval point / round point". Materials are steel or stainless steel.   SAIDA Manufacturing Co. Ltd.
197-0831
292 Shimoyotsugi Akiruno-city Tokyo JAPAN
(FAX No.)+81 42-559-0138
 
Back to the former page
Custom-ordered Slotted Cylinder Head Screws, Slotted Flat Head Screws and Slotted Countersunk Head Screws
Slotted Special Cylinder Head Screw   M2xP0.4xL1.8
(Material) Stainless steel
bond-stop-screw bond-stop-screw
The V-groove of the dia. 3.5 is for prevention of the burr outbreak of the slotted bottom.

Return to the top of this page

Back to the former page

Slotted Flat Head Screw   M0.7xP0.175xL1.2
(Material) Stainless steel
hira-M0.7x1.2(SUS) hira-M0.7x1.2(SUS)

Return to the top of this page

Back to the former page

Slotted Countersunk Head Screw   M1xP0.25xL3
(Material) Stainless steel
M1x3(SUS) M1x3(SUS)

Return to the top of this page

Back to the former page

Slotted Screw for the sewing machine  SM5/64
(Material) S45C   Hardening and Ni plating
sewing machine screw sewing machine screw

Return to the top of this page

Back to the former page

Slotted Special Cylinder Head Screw   M2xP0.4
(Material) Stainless steel
concert-screw concert-screw
The V-groove of the dia. 2.5 is for prevention of the burr outbreak of the slotted bottom.

このページのトップに戻ります

Custom-ordered Small Machine Screws

 In addition to the setscrews, we can manufacture the custom-ordered cylinder head screws, the custom-ordered flat head screws and the other custom-ordered screws.
 Manufacturable diameter size for machine screw from M0.3 to M3.
 In particular, we are good at manufacture of the thread length which is less about 2 times of the nominal diameter.
 We are good at manufacture the shorter thread length than 2 pitch of cylinder head screw or flat head screw.
 We can manufacture the machine screws of incomplete thread that is less than 0.5 times pitch.
 A head diameter can be manufactured size range is from 1.0mm to 5.0mm.
 Various plating and heat treatment are possible.
 We need your drawings or sketches for your custom-ordered screws.
 Dimensions and tolerances, please be sure to fill in the drawings and sketches.

Return to the top of this page

Back to the former page

Star
PJR-JAB